This is the DL - Type Probe to fit the THX test units and most others on the market. Now ships with a cable

Cables included with your device for a D type probe may not work with this probe.
When calibrating you must use the HLDL number on your test block. Not the HLD number which is for a D or DC type probe.

For measurments in extremely confined spaces, at the base of grooves, gears etc.

Maximum Hardness of the Sample 950HV (Vickers)

Average Roughness of Sample     Ra: 1.6um (approx 200 Grit)

Impact probe tip Length          50mm

Impact Probe tip Diameter         4mm

Impact probe Weight           100g

Min weight of sample
       Of compact shape        -      5kg   /   11lbs
       On solid support           -      2kg   /  4.5lbs
       Coupled on plate          - 0.05kg   /  0.2lbs

Min thickness of sample
       Uncoupled                     - 25mm  /  .98inch
       Coupled                         - 3mm  /    .12inch
      

Reviews about DL Type Probe for hardness tester

Average rating:

Total reviews: 1
Write your own review on this product.

Write a review

Write a review